Gardner Denver

Gardner Denver Refrigeration Compressors — Verified Performance, Documented Efficiency

Screw, reciprocating, and oil-free compressors with AHRI-certified COP ratings, published displacement curves, and compatibility across R-290, R-744, R-1234ze, and legacy HFC refrigerants. Every unit ships with measured performance data.

View Compressor Catalog Request Specifications
7,200+ Units Per Year
52 Countries Served
68 R&D Engineers
22 Service Centers
“

We replaced aging reciprocating compressors with Gardner Denver variable-speed screw units across our three cold storage distribution centers. The CompressorView diagnostics platform detected a bearing anomaly in one unit at our Memphis facility 11 days before it would have caused a shutdown — the system flagged a 0.3mm increase in vibration amplitude on the discharge side bearing. Over 14 months of operation, our metered energy data shows a 28% reduction in kWh per ton of refrigeration at matched capacity.

James Whitfield

VP of Operations, Pacific Cold Chain Networks — 3 facilities, 320,000 sq ft combined

Compressor Product Lines

Semi-hermetic and open-drive compressor platforms engineered for refrigeration, heat pump, and process cooling applications. Each series ships with AHRI-certified performance data.

Gardner Denver screw compressor

Screw Compressors

Twin-screw semi-hermetic models from 25 to 800 kW cooling capacity. Variable-speed drive ready, R-290 and R-744 compatible.

Gardner Denver reciprocating compressor

Reciprocating Compressors

2 to 8-cylinder semi-hermetic reciprocating units for medium and low-temperature refrigeration. Capacity range 5 to 120 kW.

Gardner Denver oil-free compressor

Oil-Free Compressors

Scroll and screw oil-free platforms for pharmaceutical, food-grade, and cleanroom cooling. Zero oil carryover verified per ISO 8573-1 Class 0.

Gardner Denver positive displacement blower

Positive Displacement Blowers

Roots-type and rotary lobe blowers for pneumatic conveying, aeration, and process gas applications. Flow rates up to 15,000 m³/h.

Industries We Serve

Application-specific compressor selection and system integration across six core industry verticals.

⚙

Food & Beverage Processing

Low-temperature screw compressors and oil-free units for blast freezing, cold storage, and beverage carbonation cooling lines.

⚛

Pharmaceutical & Biotech

Oil-free compressor systems meeting GMP requirements for vaccine cold chain, cleanroom HVAC, and pharmaceutical process cooling.

⚡

Data Center Cooling

Variable-speed screw compressors optimized for IPLV performance in precision air conditioning and liquid cooling loops.

❄

Cold Chain Logistics

Reciprocating and screw compressors for transport refrigeration, distribution warehouse cooling, and cross-dock temperature control.

⚖

Industrial Process Cooling

High-capacity screw compressor packages for chemical plants, petrochemical facilities, and manufacturing process heat removal.

⛪

Commercial HVAC

Scroll and screw compressors for rooftop units, packaged chillers, and air-handling systems in commercial buildings.

Need Compressor Specifications for Your Next Project?

Our application engineering team provides compressor selection matrices, performance curve analysis, and system integration support. Response within 24 hours.

Request Technical Consultation

Technical FAQ

Common compressor selection, refrigerant compatibility, and service questions from our engineering inquiry data.

Compressor Selection

Our compressor platforms support R-290 (propane), R-744 (CO2 transcritical and subcritical), R-1234ze, R-134a, R-404A, R-410A, and R-407C. Each compressor datasheet specifies the approved refrigerant list and corresponding operating envelope. For R-290 and R-744 applications, dedicated compressor series with reinforced pressure ratings and ATEX-compliant motor housings are available.

The choice depends on capacity, evaporating temperature, and load profile. Screw compressors are preferred above 50 kW for continuous-duty applications with variable loads, as their VFD compatibility enables 30-50% part-load energy savings. Reciprocating compressors are typically specified for applications below 120 kW, especially in cascade systems or where multiple fixed-capacity stages are required. Our application engineers provide side-by-side comparison data for specific project conditions.

COP varies by compressor type, refrigerant, and operating conditions. Our screw compressors typically achieve COP of 4.0 to 5.8 at standard ARI conditions, while reciprocating units range from 3.2 to 4.5. All published COP data is AHRI-certified and verified through third-party testing. Full performance curves including IPLV data are available in each compressor series datasheet.

Service & Support

Yes. Our OEM engineering team provides system-level integration support including compressor selection matrices, vibration analysis, piping layout validation, and control interface documentation. We work with chiller, heat pump, and condensing unit manufacturers to ensure proper compressor-to-system matching. OEM partners receive dedicated engineering contacts and priority access to new product development information.

CompressorView is our integrated diagnostics platform that monitors vibration amplitude, discharge temperature, oil pressure, suction superheat, and motor current in real time. The system uses threshold-based alerts and trend analysis to predict maintenance needs before failures occur. Dashboard access is included with all new compressor units for 24 months, with extended subscriptions available.

Gardner Denver operates 22 service centers across 52 countries. For customers on our Preventive Maintenance Agreement, emergency response time is 24 hours in major metropolitan areas and 48 hours in regional locations. All service technicians carry genuine replacement parts for common wear items. Remote diagnostics through CompressorView can resolve approximately 35% of service calls without an on-site visit.